NICAM Broadcast Selection
To let you enjoy NICAM broadcasting, this LCD TV set receives NICAM stereo system, bilingual, and monaural broadcasts. If the sound quality is poor due to a weak signal or other problems during NICAM broadcast reception, set the �Off� position of the NICAM to change the TV sound to monaural.
Stereo
The LCD TV set is receiving a stereo broadcast. � Each time you press MPX, the mode changes between �NICAM STEREO� and �MONO�. � When �MONO� is selected, the TV sound is output monaurally.
(When stereo sound is received)
1 2 3
Press MENU to display the MENU screen. Press \/| to select �Setup�. Press '/" to select �CH setup�, and press OK.
Menu[Setup: Setup Picture Sound CH Clo Dis Ter CH set Features setup ck set play m minal up] up ode select
49
NICAM STEREO
49
MONO
Bilingual The LCD TV set is receiving a bilingual broadcast. � Pressing MPX changes the audio mode in the order shown below. � M1=main sound, M2=sub sound, or MONO=monaural sound, can be selected.
(When main sound is selected) (When sub sound is selected)
AV2 In/Out PC setup Language
4
NICAM M1
(When monaural sound is selected)
49
NICAM M2
49
Press '/" to select �NICAM�, and press \/| to select �Off�. When the NICAM sound is set to the �Off� position, the TV sound is output in monaural. Press MENU to exit. (When off position is selected)
5
MONO
49
15
NICAM
Monaural The LCD TV set is receiving a monaural broadcast. � Each time you press MPX, the mode changes between �NICAM MONO� and �MONO�.
(When monaural sound is received)
49
NICAM MONO
49
MONO
NOTE � When the NICAM sound is set to the �Off� position, MPX cannot be used to change the audio mode (stereo and bilingual settings).
NOTE � If approximately 3 seconds pass without a button being pressed, the mode setting is automatically terminated and the LCD TV set returns to the normal mode. � The setting can be selected individually for each channel number.
