Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 26 (kliknij aby zobaczyć)
NICAM Broadcast Selection
To let you enjoy NICAM broadcasting, this LCD TV set receives NICAM stereo system, bilingual, and monaural broadcasts. If the sound quality is poor due to a weak signal or other problems during NICAM broadcast reception, set the �Off� position of the NICAM to change the TV sound to monaural.
Stereo
The LCD TV set is receiving a stereo broadcast. � Each time you press MPX, the mode changes between �NICAM STEREO� and �MONO�. � When �MONO� is selected, the TV sound is output monaurally.
(When stereo sound is received)
1 2 3
Press MENU to display the MENU screen. Press \/| to select �Setup�. Press '/" to select �CH setup�, and press OK.
Menu[Setup: Setup Picture Sound CH Clo Dis Ter CH set Features setup ck set play m minal up] up ode select
49
NICAM STEREO
49
MONO
Bilingual The LCD TV set is receiving a bilingual broadcast. � Pressing MPX changes the audio mode in the order shown below. � M1=main sound, M2=sub sound, or MONO=monaural sound, can be selected.
(When main sound is selected) (When sub sound is selected)
AV2 In/Out PC setup Language
4
NICAM M1
(When monaural sound is selected)
49
NICAM M2
49
Press '/" to select �NICAM�, and press \/| to select �Off�. When the NICAM sound is set to the �Off� position, the TV sound is output in monaural. Press MENU to exit. (When off position is selected)
5
MONO
49
15
NICAM
Monaural The LCD TV set is receiving a monaural broadcast. � Each time you press MPX, the mode changes between �NICAM MONO� and �MONO�.
(When monaural sound is received)
49
NICAM MONO
49
MONO
NOTE � When the NICAM sound is set to the �Off� position, MPX cannot be used to change the audio mode (stereo and bilingual settings).
NOTE � If approximately 3 seconds pass without a button being pressed, the mode setting is automatically terminated and the LCD TV set returns to the normal mode. � The setting can be selected individually for each channel number.
