SHARP LC-30HV4D
Instrukcja Serwisowa

LC-30HV4U LC-30HV4D

7. Remove the system/control terminal retaining: 7-1. Remove the four hex head screws securing the terminals of the system and control cables (white). 7-2. Remove the two screws securing the terminal of the system cable (gray). 7-3. Remove the two rear chassis retaining screws. 8. Remove the PC I/F and SR units: 8-1. Remove the six PC I/F top shield retaining screws and remove the shield. 8-2. Remove the six PC I/F unit retaining screws and remove the unit. 8-3. Remove the two PC I/F bottom angle retaining screws and remove the angle. 8-4. Remove the two SR unit retaining screws and remove the SR unit. 9. Remove the rear chassis. 9-1. Remove the three tuner nuts. 9-2. Remove the 10 rear cabinet retaining screws and remove the rear cabinet. 10. Remove the three power unit retaining screws and remove the power unit.

8-1

8-2 PC I/F Top Shield
Rear cabinet 9-2 9-2 9-2 9-1

8-3 PC I/F unit

PC I/F Bottom Angle

SR unit 8-4

7-1 7-2 7-3

10

Power unit

15