Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 19 (kliknij aby zobaczyć)
8. Operation
Other Settings The projector is equipped with the following functions to optimize its use and handling: Start-up screen This function allows you to display or suppress the default Philips start-up screen upon the projector�s start up. 1. Press Menu. � The menu bar appears on the screen. 2. Use Cursor Control to move the cursor to Settings. 3. Select Start-up screen by using Cursor Control. 4. Select On to use the default setting or Off to suppress the start-up screen. 5. Press Menu to close the On Screen Display. Feedback This function allows you to suppress OSD messages. Warning or error messages however are never suppressed. 1. Press Menu. � The menu bar appears on the screen. 2. Use Cursor Control to move the cursor to Settings. 3. Select Feedback by using Cursor Control. 4. Select On to have OSD screens displayed or Off to suppress the display of OSD screens. 5. Press Menu to close the On Screen Display. Key lock Key lock is used to de-activate all remote and local controls. You have to switch the projector off and on again by pulling out the mains cable to unlock the keys. 1. Press Menu. � The menu bar appears on the screen. 2. Use Cursor Control to move the cursor to Settings. 3. Select Key lock by using Cursor Control. 4. Press OK (�/� �) for 3 seconds to lock all keys. 5. The On Screen Display will disappear automatically. Factory reset This function is used to reset all user settings to the default factory settings. 1. Press Menu. � The menu bar appears on the screen. 2. Use Cursor Control to move the cursor to Settings. 3. Select Factory reset by using Cursor Control. 4. Press OK (�/� �) for 3 seconds to reset all user settings. 5. Select the next item to be adjusted in the sub menu or press MENU to close the On Screen Display.