POLAROID LCD-1550
Instrukcja Obsługi

MENU adjustment

MENU adjustment

4

PC ADJUSTMENT

(ONLY IN PC MODE)

Press MENU ( ) button to display the MENU screen. Select �PC� by pressing VOL (�/�) buttons and press CH down (�) button to enter into the items below.

PC mode input format
Resolution 640*480 640*480 640*480 640*480 720*400 800*600 800*600 800*600 800*600 1024*768 1024*768 1024*768 V freq. (Hz) 60 72 75 85 70 60 75 85 72 60 70 75 H freq. (KHz) 31.5 37.9 37.5 43.3 31.5 37.9 46.9 53.7 48.1 48.4 56.5 60.2

VGA

H-POSITION
1 Move to �H-POSITION� by pressing CH (�/�) buttons. 2 Press VOL (�/�) buttons to adjust the horizontal position of
before adjustment after adjustment

SVGA

displayed image.

XGA

V-POSITION
1 Move to �V-POSITION� by pressing CH (�/�) buttons.
before adjustment after adjustment

In case of inputting the PC signal other than above signals, �OUT OF RANGE� will appear on the screen.

Before adjustment, please setup your PC software...
Even if your actual display-settings screen looks different from the windows below, basic setup methods will be applied in most of the cases. 1 First, click on �Settings� on the Windows Start menu. While �Settings� is selected, move the cursor to submenu �Control Panel�.

2 Press VOL (�/�) buttons to adjust the vertical position of displayed image.

H-SIZE
1 Move to �H-SIZE� by pressing CH (�/�) buttons. 2 Press VOL (�/�) buttons to adjust the horizontal size of displayed image.

PHASE
(Fine image adjustment in PC monitor mode) 2 When the control panel screen appears, click on �Display� and a display dialog box will appear. 1 Move to �PHASE� by pressing CH (�/�) buttons. 2 Press VOL (�/�) buttons to adjust the phase to get a clearer picture.

SCREEN EXPAND (only 17� wide model)
3 Navigate to the �Settings� tab on the display dialog-box. The correct setting of size (resolution) is �1024 x 768 pixels�. (optical resolution) Check the vertical frequency of your PC. (Available vertical frequency at 1024*768 mode : 60Hz, 70Hz, 75Hz) 1 Move to �SCREEN EXPAND� by pressing CH (�/�) buttons. 2 Press VOL (�/�) buttons to select screen expand type. You can select a Screen Expand successively that has its own aspect ratio.

expand OFF

expand ON

22

23