|
|
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Wszystko w porządku.
Instrukcja czytelna i kompletna.
Dziękuję.
all right!
thank you.
;
Bardzo dobra instrukcja. Zawiera wszystko co potrzeba, polecam!
 ;
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
;
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
;
...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
PRACTICAL SERVICE FIGURE
< TUNER SECTION >
< FM SECTION >
IHF Sensitivity: (THD 3%) Signal to noise ratio: (Input 54dB) Distortion: (Input 54dB) Auto stop level: Stereo separation: Intermediate frequency: 15dB±5dB (at 90MHz) 14dB±5dB (at 98.0/108.0MHz) More than 55dB (at 98.0MHz) Less than 1.5% (at 98.0MHz) 25±10dB (at 98.0MHz) More than 17dB (at 98.0MHz) 10.7MHz
FL (13-ST-36GNAK) GRID ASSIGNMENT/ANODE CONNECTION
< LW SECTION > (K, EZ MODELS)
Sensitivity: 58±5dB (at 144kHz) 55±5dB (at 198kHz) 52±5dB (at 290kHz) More than 25dB (at 198kHz) 450kHz
GRID ASSIGNMENT
Signal to noise ratio: Intermediate frequency:
< DECK SECTION >
Tape speed: Wow & flutter: Distortion: 3000Hz+3%/�2% Less than 0.35% (JIS, R.M.S) Less than 3.0% (PB) Less than 7.0% (REC) More than 40dB (PB) More than 35dB (REC/PB) More than 55dB More than 50dB More than 35dB
< AM SECTION > (LH MODEL)
Sensitivity: (S/N 10dB) 46dB±5dB (at 600kHz) 44dB±5dB (at 999kHz) 42dB±5dB (at 1404kHz) More than 38dB (at 1000kHz) Less than 4.0% (at 1000kHz) 35-60dB (at 1000kHz) 450kHz
Signal to noise ratio: Erasing ratio: Cross talk: Separation:
Signal to noise ratio: (Input 74dB) Distortion: (Input 74dB) Auto stop level: Intermediate frequency:
< MW SECTION > (K, EZ MODELS)
Sensitivity: (S/N 10dB) 46dB±5dB (at 603kHz) 44dB±5dB (at 999kHz) 42dB±5dB (at 1404kHz) More than 38dB (at 999kHz) Less than 3.0% (at 999kHz) 50+10/-15dB (at 999kHz) 450kHz
ANODE CONNECTION
Signal to noise ratio: (Input 74dB) Distortion: (Input 74dB) Auto stop level: Intermediate frequency:
37
38
|
|
|
> |
|
