Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 7 (kliknij aby zobaczyć)
Drying
tips
TUMBLE
PRESS� Setting
The dryer does not heat when the Temperature Selector is set on FLUFF AIR. Thus setting can be used to fluff bedding, rubber etc plastic pillows, tablecloths, foam stuffed toys, sneakers
The TUMBLE PRESS setting removes wrinkles from dry clothing such as items that may have been packed In a suitcase, closet, or items not removed from the dryer.
1. Set Temperature Selector on FLUFF AIR. 2. Turn Control Knob to the number of minutes you want in the PERMANENT PRESSCycle. 3. Push START Button
1. Set Temperature Selector on PERM�T PRESS/HEAVY HIGH. 2. Set Control Knob on TUMBLE PRESS. 3. Push START Button. The load will tumble in heated air for 5 minutes. The heat shuts off and the dryer continues to tumble the load for 10 more minutes. for best resultsTUMBLE PRESS only a few items at a time. Put them on hangers or fold them as soon as the dryer stops.
Mixed loads
Drying
When dryrng a load with different kinds and weights of fabrics, use the cycle suggested for the lightest fabrrcs When the dryer stops, remove dry items and reset the control
times
Drying times will vary depending on l amount of moisture in the clothes. l type and weight of the fa brie l size of the load. l room temperature around the dryer. l temperature of the wash rinse water. l amount of lint in the lint screen. l dryertemperature selection. See page 6 in your�Dryer Guide� for more information. 7