CORBERO LF650
Instrukcja Obsługi

DESCRIPTION OF THE CONTROLS
Control panel

1. WASHING POWDER DISPENSER
The dispenser is provided with 4 compartments marked with the following symbols:

BUTTON

(Mod.: LF 400)

Pressing this button when starting A or B programmes, the temperature will be increased from 60°C to 90°C. �1/2 LOAD� BUTTON (Mod.: LF 450, LF 550 and LF 850) Pressing this button before starting the �intense� programmes there will be one rinse less which leads to energy and water saving. �800/500�BUTTON (Mod.: LF 850) If your washing machine is provided with this push button, press it to reduce the spinning speed from 800 to 550 r.p.m. �NO SPINNING� BUTTON (Mod.: LF 450)

«Prewash» symbol shows the compartment for the prewash detergent. «Wash» symbol shows the compartment for the washing detergent. «smooth» symbol shows the compartment for the smoothing additives. «bleach» symbol shows the compartment for the bleaching additives.

Pressing this button before starting the �intense� washing program all spinnings will be excluded. The other steps of the program remain unchanged. �RINSE HOLD� BUTTON (delicate fabrics only) (Mod.: LF 550 and LF 850) Pressing this button together with the programs for delicate fabrics, the water will hold up in the wash tub at the end of the cycle. Press again to drain the water and take out the clothes.

2. ON/OFF LAMP
It lights when the appliance is operating.

3. PROGRAM SELECTOR
To select the required program turn the control clockwise until the marker on the top coincides with the number of the required program (reference mark on the control panel). If at any chance you pass by the required number NEVER TURN THE CONTROL ANTICLOCKWISE just continue clockwise until the required number is reached again. �COLD WASH� BUTTON (Mod.: LF 400) Pressing this button when starting any program it will be run through with cold water. All other features of the program as intensity and duration remain unchanged. Advisable for synthetic and delicate fabrics: curtains, stores and other not too dirty fabrics.

TEMPERATURE SELECTOR
(Mod.: LF 450, LF 550 and LF 850) This control allows you to select the temperature of the washing cycle in accordance with the kind of clothes to be washed. Press and turn the control until the required temperature coincides with the marker. On the program table you will find the most apropriate temperature for each kind of washing. Selecting any program can be run through with cold water. This will ensure a saving in electricity consumption.

28