Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 7 (kliknij aby zobaczyć)
Drying tips
TUMBLE
PRESS� Setting
The dryer does not heat when the Temperature Selector is set on FLUFF AIR. This settina con be used to fluff bedding, p&c tablecloths, foam rubber pillows, stuffed toys, sneakers, etc.
The TUMBLE PRESS setting removes wrinkles from dry clothing such as items that may hove been pocked in a suitcase, closet, or items not removed from the dryer.
1. Turn the Temperature to FLUFFAIR.
Selector
2. Turn the Control Knob to the number of minutes you wont in the PERMANENT PRESS Cycle. 3. Push the START Button.
Mixed loads
1. Set Temperature Selector to PERMIT PRESS/HEAVY HIGH. 2. Set Control Knob to TUMBLE PRESS. 3. Push START Button. The load will tumble in heated air for 10 minutes. The heat shuts off and the dryer continues to tumble the load for 10 more minutes. For best results, TUMBLE PRESS only 0 few items at a time. Put them on hangers or fold them as soon as the dryer stops.
Drying times
Drying times will vary depending on: l amount of moisture in the clothes. l type and weight of the fabric. l size of load. l room temperature around the dryer. l temperature of the wash rinse water. l amount of lint in the lint screen. dryer temperature selection. l See in your �Dryer Guide� more information. for
When drying a load with different kinds and weights of fabrics, use the cycle suggested for the lightest fabrics. When the dryer stops, remove dry items and reset the control.
