Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 9 (kliknij aby zobaczyć)
Lint screen
Clean the lint screen before each load. A screen blocked by lint can increase drying time and may be a FIREHAZARD.
Open the lid and pull the lint screen straiaht out
ROLL the lint off the screen with
your fingers. DO NOT rinse or wash the screen. Push the screen firmly back into place. I
Lint removal
Lint can gather inside the dryer and create a FIRE HAZARD. This lint
should be removed on dryer usage. at least every 2 to 3 years, or more often, depending I I
Igniter
Lower Access - ,#.I
ELECTRIC
DRYERS
GAS DRYERS
I
Cleaning should be done only by a qualified
person.
1. Remove back panel (electric)
or lower access panel (gas). 2. Avoid damaging wires, thermostats, funnel or igniter. 3. Remove lint from shaded area see art-with a soft brush or vacuum cleaner. 4. Replace panel; reconnect and re-level dryer. 0
