LENCO LINN MOVING COIL CARTRIDGE
Instrukcja Obsługi

How to remove your Linn Tonearm from your Linn LP 12

5
5. Using the 1.5 Allen (hex) key (early arms used 1.27 mm) loosen the arm plug locking grub screw at the bottom of the arm by tilting the turntable slightly. 6. Or if the turntable is raised on books, don�t tilt the turntable but locate and loosen the grub screw.

7. Unplug the arm cable from the bottom of the arm.

8. Supporting the Tonearm as shown loosen the grub screw with 4 mm Allen (hex) key and remove from turntable. With the Ittok LVII, first un-clip from the arm rest and, supporting as shown, lift clear of the turntable.

Page 3