SHARP LL-T17A3
Instrukcja Serwisowa

CHAPTER 3. DISASSEMBLY AND ASSEMBLY
1. SEPARATING LCD AND BASE SECTION
1. Bring the LCD section  down rearward. Remove the 4 screws ! and separate the LCD from the base section . 2. Remove the 9 screws  and then remove detach the shield plate . Remove the 6 screws ! and connectors. Remove the LCD main board. Remove the 2 hex. screws " and then remove the LCD main board #.

1

5 3 3 3
2

2

3 4 3 1

1

3

3. REMOVING LCD MODULE
1. Remove the 3 screws  and connector, and then detach the LCD display board . Remove 12 screws ! and then detach the LCD. Remove the 4 screws " and connectors. Remove the LCD module #.

2. REMOVING LCD MAIN BOARD
1. Remove the 8 screws  and then remove the rear cover .

4

5 4 4

2 1

4 3 3 2 3
1 1

3

1

LL-T17A3

DISASSEMBLY AND ASSEMBLY

3�1