Prewashcycle
Model LPR6244A For best results, use warm water for prewashing stained laundry. Hot water can set stains. 1. Use recommended amount of presoak product or detergent. 2. Push Cycle Control Knob in. 3. Turn clockwise to point to a number next to PREWASH. 4. Pull the Cycle Control Knob out. The washer will start. 5. When the cycle is over, add detergent for the next selected wash cycle. The Prewash cycle should be followed by a wash cycle. NOTE: See the Laundry Guide for additional prewashing or soaking tips.
Manual clean lint filter
Clean the filter at the bottom of the agitator after every load for the best filtering results. To clean: 1. Lift off the agitator barrel. 2. Wash or wipe the filter clean in the bottom of the agitator barrel. The filter is not removable. 3. Replace the agitator barrel and snap it into place.
