RINSE/DRAIN AND SPIN
Rinse and Spin feature
When using extra detergent for heavily soiled clothes, or washing special-care items, you may find an extra rinse and spin is needed. � For an additional rinse and spin, push in the Cycle Control knob and turn it clockwise to any of the Rinse settings. The washer fills to the selected load size, agitates, drains, and spins.
Drain and Spin feature
A drain and spin may help shorten drying times for some heavy fabrics or special-care items by removing excess water.
� For a drain and spin, push in the Cycle Control
knob and turn it clockwise to any of the Spin settings. Then pull out the Cycle Control knob. The washer drains, then spins.
MAGIC CLEAN
®
LINT FILTER
Basket interior
Your washer has a self-cleaning lint filter at the bottom of the basket. Wash and rinse water flow over the filter during agitation, separating the lint from the water. The lint spins out of the system during the spin part of the cycle. If your washer drains into a tub, remove any lint collected in the tub or strainer.
MAGIC CLEAN lint filter
UNDERSTANDING NORMAL WASHER SOUNDS
Your new washer may make sounds your old one didn�t. Because the sounds may be unfamiliar, you may be concerned about them. Don�t be; most of them are normal. The following describes some of the sounds you may hear and what causes them.
During drain
If water is drained quickly from your washer (depending on your installation), you may hear air being pulled through the pump during the end of draining.
After drain and before spin
When the cycle changes from draining to spinning, you may hear gears engaging.
During washing
When you select a small load size setting, your washer has a lower water level. This may cause a clicking sound from the upper part of the agitator.