JVC LT-17S2
Instrukcja Obsługi

Remote control buttons and functions

� If the main-picture signal is poor, the quality of the sub-picture may also be poor. � If the pictures have different standards, the top and bottom of one of them may be missing. � If you press the menu button when the PIP functions is on, PC menu will appear. To display the TV menu, change the mode to the TV mode.

Operating a JVC brand VCR or DVD player
These buttons will operate a JVC brand VCR or DVD player. Pressing a button that looks the same as the device�s original remote control button has the same effect as the original remote control. 1 Set the VCR/TV/DVD switch to the VCR or DVD position VCR: When you are using a VCR, set the switch to the VCR position. You can turn the VCR on or off with the (Standby) button.

DVD: When you are using a DVD player, set the switch to the DVD position. You can turn the DVD player on or off with the (Standby) button. 2 Press the VCR/DVD Control Button to control your VCR or DVD player � If your device is not made by JVC, these buttons will not work. � Even if your device is made by JVC, some of these buttons may not work, depending on the device you are using. � You can use the p / buttons to choose a TV channel the VCR will receive, or choose the chapter the DVD player plays back. � Some models of DVD player use the p / buttons for both operating the fast forward/backward functions and for choosing the chapter. � Set the VCR/TV/DVD switch to the TV position when you turn the TV on or off.

14