Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 60 (kliknij aby zobaczyć)
SET UP menu
ID LIST
You can store a name for each of the devices connected to each EXT terminal. Giving a name to an EXT terminal makes the EXT terminal number appear on the screen, together with its name. 1 Press the 5 or 6 buttons to choose an EXT terminal 2 Press the blue button to display the name list (ID LIST)
> EXT SETTING EXT-1 EXT-3 TV DTV DUBBING EXT-2 ID LIST VHS S-VHS DVC CAM SAT STB GAME DVD DVR
DUBBING
You can choose a signal source to be output from the EXT-2 terminal. You can do this with the output signals of the devices connected to other EXT terminals, or with the picture and sound from a TV channel you are currently viewing.
Caution:
Every time you dub, check this DUBBING setting beforehand. This setting may change automatically when �Timers (DTV Timer Recording)� or �Direct Rec� of the T-V LINK function is used. 1 Press the 5 buttons to choose the arrow from the menu
> EXT SETTING EXT-1 DUBBING EXT-2 EXT-3
EXT-4
OK
D0021-EN
TV
3 Press the 6 buttons to choose a name. Then press the a button The ID LIST disappears and the name is assigned to the EXT terminal. � You cannot assign an EXT terminal name not found in the name list (ID LIST). To erase a name assigned to the EXT terminal: Choose a blank space. 4 Press the a button to complete the setting
DTV
EXT-4
OK
D0022-EN
2 Press the 6 buttons to choose an EXT terminal or TV. Then press the a button The arrow in the menu represents a signal flow. The left side of the arrow shows a signal source output from the EXT-2 terminal. EXT-1/EXT-3: The output signal of the device connected to an EXT terminal passes through the TV and is output from the EXT-2 terminal. TV: The picture and sound of the Analogue terrestrial broadcasting TV channel you are currently viewing are output from the EXT-2 terminal.
