PHILIPS LX3600D/69
Instrukcja Obsługi

Getting Started
Selecting the colour system that corresponds to your TV This DVD system is compatible with both NTSC and PAL. In order for a DVD to play on this DVD system, the colour system of the DVD, the TV and the DVD system should match.

Step 3: Setting the speakers� channels
You can adjust the delay times (centre and surround only) and volume level for individual speakers. These adjustments let you optimise the sound according to your surroundings and setup. Speaker settings are only active on Multi-channel audio outputs.

E n g l i s h

- - VIDEO SETUP PAGE - TV TYPE TV DISPLAY CLOSED CAPTION PROGRESSIVE PICTURE SETTING
- - SPEAKER SETUP PAGE - FRONT SPEAKERS CENTER SPEAKER REAR SPEAKERS SUBWOOFER NIGHT MODE

PAL NTSC MULTI

- - AUDIO SETUP PAGE - SPEAKER SETUP ANALOG OUTPUT

1 Stop playback (if any) and press SETUP. 2 Press 2 twice to select �Video Setup 3 Press 3 4 to highlight �TV Type�. 4 Enter its submenu by pressing 2. 5 Move the cursor by pressing 3 4 to
highlight one of the option below: Multi � Select this if the connected TV is compatible with both NTSC and PAL (multi-system). The output format will be in accordance with the video signal of the disc. NTSC � Select this if the connected TV is NTSC system. It will change the video signal of a PAL disc and output to NTSC format. PAL � Select this if the connected TV is PAL system. It will change the video signal of an NTSC disc and output to PAL format. Page�.

1 Stop playback (if any) and press SETUP. 2 Press 2 to select �Audio Setup Page�. 3 Press 3 4 to highlight the �Speaker
Setup�.

4 Enter its submenu by pressing 2. 5 Press 3 4 to select (Front L&R, Center,
Surr L&R, Sub Woofer), then press 2 to enter the speaker setting menu. 6 Use 3 4 to select the settings for each speaker that suit your surround sound needs, which may includes : � Delay time settings - use the longer delay settings when the surround speakers are closer to the listener than the front speakers. � Adjusting the volume levels for one or both speakers until the sound evens. � The test tone will be automatically generated.

6 Select an item and press OK.
To remove the menu Press SETUP.

7 Press OK to confirm.
To remove the menu Press SETUP.

16