Starting the Washing Program
0 1. Check whether the water tap is open.
2. Start the washing program: press the START/PAUSE button. The washing program is started, or starts at the end of the time delay set.
3
If the DOOR indicator flashes red when the START/PAUSE button is pressed, the door is not properly closed. Close the door firmly and press the START/PAUSE button again. If the delay timer has been set: The start time delay set on the delay timer counts down; the time remaining until the program starts is displayed on the multi-display (in whole hours remaining). During this time you can add washing, change or stop the delay timer. � Adding washing: press the START/PAUSE button, the door can be opened. Then close the door and press the START/PAUSE) button again. � Changing or stopping delay timer: press the DELAY TIMER button repeatedly until the desired time is displayed; when the program duration is displayed (display in minutes, e.g.119), the washing program starts without delay.
