AEG Lavatherm 56600
Instrukcja Obsługi

Something not working?

Something not working?
If the tumble dryer is not working correctly please carry out the following checks before calling out an engineer.
Symptom Possible cause The appliance is not plugged in The fuse has blown Solution Plug in the appliance Check the fuse

The STARTbutton has not Press the START button been pressed The tumble dryer will not start No program has been selected The door is not properly closed The water reservoir is full The wrong program has been selected Fluff filter blocked Condenser unit covered with fluff The tumble dryer has been overloaded The result are unsatisfactory Laundry not sufficiently spun prior to tumble drying The vent in the base of the appliance is covered A residue may have formed on the drum interior, blocking the sensors Select the required program Close the door Empty the water reservoir Select a different program Clean the fluff filter Clean the condenser unit Observe the maximum loads stated for each program Ensure the wash load is well spun before tumble drying Ensure the vent is clear

Clean the inside of the drum with white vinegar

25