Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 18 (kliknij aby zobaczyć)
Tape Operation / Recording
English
Synchro start CD recording 1 2 3 4 5
Select CD source. Insert a disc and if desired, programme track numbers. Press OPEN to open the tape door. Insert a suitable tape into the deck and close the tape door. Press RECORD to start recording. � COPY or RECORD is displayed briefly and RECORD is shown during recording. � Playing of the CD programme starts automatically from the beginning of the CD after 7 seconds. It is not necessary to start the CD player separately. G If you wish, press CLOCK once to monitor the counter display.
Recording timer
To record from the radio, you will need to use a preset radio station and to set a start (ON) and finish (OFF) time.
1 2 3
Insert a suitable tape into the deck. � If desired, select tape reverse mode option. Select the preset radio station to record from. Press TIMER ON�OFF for more than 2 seconds. �
TIMER
flashes and a source is displayed.
4
Press SELECT SOURCE repeatedly, or turn VOLUME clockwise until REC TUN source is displayed. Press TIMER ON�OFF to confirm the source. � SET ON TIME is displayed, TIMER and the clock digits for the hours flash. Turn VOLUME to set the hours: clockwise for hours up; anti-clockwise for hours down. Press TIMER ON�OFF again. � The clock digits for the minutes flash. Turn VOLUME to set the minutes: clockwise for minutes up; anti-clockwise for minutes down.
5
6
To stop recording, press STOP 9.
6 7 8 9
Recording from the radio 1 2 3 4
Tune to the desired radio station (see �Tuning to radio stations�). Press OPEN to open the tape door. Insert a suitable tape into the deck and close the tape door.
Press RECORD to start recording. � RECORD is displayed briefly and RECORD is shown during recording. G If you wish, press CLOCK once to monitor the counter display. To stop recording, press STOP 9.
Press TIMER ON�OFF to confirm the ON start time. � SET OFF TIME is displayed, TIMER and the clock digits for the hours flash.
10 Repeat steps 6-8 to set the finish time. 11 Press TIMER ON�OFF to confirm the timer
settings. � TIMER is shown and the recording timer is now set.
5
Recording from Aux 1 2 3
Select AUX source. If necessary, prepare the additional appliance for recording.
Press RECORD to start recording. � RECORD is displayed briefly and RECORD is shown during recording. G If you wish, press CLOCK once to monitor the counter display. To stop recording, press STOP 9.
