ROLAND MC-307
Instrukcja Obsługi

Chapter 5 Creating Your Own Patterns and

18. Press the button corresponding to the timing at which Specify the lengths of rhythm tones and notes and their loudness. 12. Press the [TR-REC] button to turn off the indicator. The keyboard pads have been switched to work as ordinary keys (i.e., keys used to specify the scale). you want to enter the note message to illuminate its indicator and then enter the data.To erase the data, press the button to turn off its indicator. * Use the [ ] or [ ] buttons to shift the position of the measure (or the position in the measure) to be recorded. When a rhythm divided into sixteenth notes or eighth note triplet has been selected with the [SCALE] button, one press of the [ ] or [ ] button causes the position of the measure to shift one measure. When a rhythm divided into 32nd notes or sixteenth note triplet has been selected with the [SCALE] button, one press of the [ ] or [ ] buttons causes the position of the measure to shift half a measure. 19. When recording has finished, press the [STOP] button.

(Example) OCTAVE SHIFT = -1
SNARE
1 2 3 4 5 6 7 8

HI-HAT
9 10 11 12 13

CRASH
14 15 16

KICK

TOM

13. By pressing the relevant keyboard pads, select the rhythm tones you want to enter. * By pressing the [OCT (-/+)] button, you can use Rhythm tones other than those of the octave for the keyboard pads currently being played. * For more on the correspondence between each Rhythm tone and Mute button, refer to P. 159. 14. Upon selection of rhythm tones, press the [TR-REC] button second time to return the MC-307 to the Recording mode. (Now, the keyboard pads have been switched back to the mode in which you set the note input timing.)

Procedure for selecting rhythm set
Using the Recording screen, carry out the following operations. Procedure 1. Press the [PACH] button. The �RHYTHM� screen appears.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

2. Select a rhythm set using the [VALUE] dial or the [INC/ DEC] buttons. 3. Upon selection, press the [EXIT] button to return to the Recording screen.

15. Using Assignable knob [3], determine the type of note for the note message to be entered. Available Settings: 16. Using Assignable knob [4], determine the gate time (length of sound) for the note message to be entered. You determine this value in proportion to the gate time and the length of note appearing on the display. For example, if you want 80%, enter the note message whose length is 80% of the note you selected in Step 9. Available Settings: 5 - 200%

17. Using Assignable knob [2], determine the velocity (loudness) for the note message to be entered. The higher the value, the louder the sound. Available Settings: 1 - 127

69

Chapter5