PHILIPS MCD735/93
Instrukcja Obsługi

System Menu Options
Component Sets the video output according to your video connection. This setting is not required if you are using the VIDEO OUTPUT jack (yellow) to connect the DVD micro system to your TV. � Ypbpr: Select this if you have connected the DVD micro system to your TV using Component video jacks. � S-Video: Select this if you have connected the DVD micro system to your TV using S-Video jack. TV Mode Selects interlace or P-SCAN video output mode when Ypbpr is selected. � P-SCAN and Interlace. In the progressive scan mode, you can enjoy the high quality picture with less flickers. It only works when you have connected the DVD player's Y Pb Pr jacks to your TV that supports the progressive video input. Otherwise, a distorted picture will appear on the TV. For proper progressive scan set up, see �Getting Started-Setting up Progressive Scan feature�. Quality This menu helps you to set the video quality. Sharpness Adjusts the sharpness level. � High, Medium and Low. Brightness Adjusts the brightness level. Range: -20-+20. Contrast Adjusts the contrast level. Range: -16-+16. Gamma Adjusts the gamma level. � High, Medium, Low and None. Hue Adjusts the hue level. Range: -9-+9. Saturation Adjusts the saturation level. Range: -9-+9. Luma Delay Adjusts the luma delay. � 0 T and 1 T.

Preference Page
The options included in Preference page are: �TV Type�, �Audio�, �Subtitle�, �Disc Menu�, �Parental� and �Default�.

1 2

Press 3 4 to highlight �Quality�. Press 2 or OK to enter Video Quality Setup. The options included in Video Quality Setup page are: �Sharpness�, �Brightness�, �Contrast�, �Gamma�, �Hue�, �Saturation� and �Luma Delay�.

Note: � Preference features can be selected only during �No Disc� condition or full STOP mode.

31

English