Tape Operation / Recording
To select and record a particular passage within a CD track: � Press and hold down on 4 ¢. Release the control when you recognize the passage you want. � To pause CD playback press PLAY2; (on the remote control 2;). � Recording starts from this exact point in the track when you press RECORD�.
Recording from the radio 1 2 3 4 5 6
Tune to the desired radio station (see Tuning to radio stations). Press STOP�OPEN�0 to open the tape door. Insert a suitable tape into the deck and close the tape door. Press RECORD� to start recording. To interrupt playback press PAUSE;. To resume, press this key again. To stop recording, press STOP�OPEN�0.
6 7
To pause, press PAUSE;. Press again to resume. To stop recording, press STOP�OPEN�0.
Maintenance
Cleaning the Cabinet � Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Cleaning Discs � When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out. � Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records. Cleaning the disc lens � After prolonged use, dir t or dust may accumulate at the disc lens. To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner. Cleaning the Heads and the Tape Paths � To ensure good recording and playback quality, clean the heads A, the capstan(s) B, and pressure roller(s) C after every 50 hours of tape operation. � Use a cotton swab slightly moistened with cleaning fluid or alcohol. � You can also clean the heads by playing a cleaning tape once.
A
ABC
Demagnetising the heads � Use a demagnetising tape available at your dealer.
