As a power-saving feature, the system will automatically switch to Standby mode if you do not press any buttons within 15 minutes after a disc has stopped playing.
Volume control
iPod
Adjust VOLUME -/+ (VOL + / -) to increase or decrease the volume level. � Display shows the volume level "VOL" and a number from 1-31. �MIN� denotes the minimum volume level and �MAX� denotes the maximum volume level. IMPORTANT! Before you operate the system, complete the preparation procedures. To switch off the volume temporarily � Press MUTE on the remote control. � Playback will continue without sound and "MUTE" is displayed. � To restore the volume, press MUTE again or increase/decrease the volume level.
Switching the system on
� Press Eco Power/STANDBY-ON 2 or SOURCE on the main set. � The system will switch to the last selected source. � Press CD, iPod, FM, or USB/AUX on the remote control. � The system will switch to the selected source.
Sound control
Switching the system to Eco Power Standby mode
� Press Eco Power/STANDBY-ON 2 in the active mode. � The backlight of clock display is dim in standby. � The volume level(up to a maximum volume level of 12) interactive sound settings, last selected mode, source and tuner presets will be retained in the player's memory. � To view the clock time in Standby mode, press and hold Eco Power/STANDBY-ON 2 for 3 seconds or more. � The system enters the normal standby mode with clock display. � If the clock has not been set, "--:--" is displayed. � Press and hold Eco Power/STANDBY-ON 2 for 3 seconds or more to go back to Eco Power Standby mode. � Press DSC repeatedly to select the desired sound effect : POP, JAZZ, CLASSIC or ROCK. � Press DBB to switch on or off the bass enhancement. � If the DBB is activated, DBB oN is shown briefly.. � If the DBB is deactivated, DBB oFF is shown briefly.
