Clock/Timer
3
ECO POWER BAND STANDBY-ON RECORD DISPLAY CLOCK SET
Press TIMER SET 3 to confirm your desired mode. � �SET ON TIME� is displayed and the clock digits for the hours flash.
English
iR
MCM720 MICRO SYSTEM
4 5
USB DIRECT
ALBUM / PRESET TUNING VOLUME
Adjust VOLUME to set the hours. Press TIMER SET 3 again. � The clock digits for the minutes flash. Adjust VOLUME to set the minutes. Press TIMER SET 3 to confirm the time. � The timer is now set and activated. Activating and deactivating timer
TIMER SET SOURCE PROGRAM DSC DBB INCREDIBLE SURROUND
6 7
Clock setting 1
In standby mode, press and hold CLOCK SET. � SET CLOCK is displayed briefly. Then, clock digits for the hours flash. Adjust VOLUME to set the hours. Press CLOCK SET again. � The clock digits for the minutes flash. Adjust VOLUME to set the minutes. Press CLOCK SET to confirm the time.
� In standby or during playback, press TIMER SET 3 (TIMER on the remote control) once. � Display shows if activated, and disappears if deactivated.
2 3 4 5
Sleep timer setting 1
The sleep timer enables the system to switch off by itself after a set period of time. Press SLEEP on the remote control repeatedly to select a preset time. � The selections are as follows (time in minutes): 60 � 45 � 30 � 15 � 0 � 60 � � "SLEEP XX" or "0" is displayed. "XX" is the time in minutes.
Timer setting
� The system can be used as an alarm clock, whereby the CD, TUNER or TAPE is switched on at a set time (one time operation). The clock time needs to be set first before the timer can be used. � You can also use it to record a favourite tuner programme at a set period (refer to �Recording timer�) � During setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically.
2
When you reach the desired length of time, stop pressing the SLEEP button.
To deactivate the sleep timer � Press SLEEP repeatedly until "0" is displayed, or press Eco Power/STANDBY ON y.
1 2
In standby mode, press TIMER SET 3 for more than two seconds. Press SOURCE repeatedly to select the sound source. � �SET TIME� and �SELECT SOURCE� are displayed.
