Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 10 (kliknij aby zobaczyć)
MD-MT88H/99H
1 Inserting a MiniDisc
1 4 2 3
2 Connect the AC adaptor
AC 230-240V, 50/60 Hz (For U.K.)
1
Illustration: MD-MT88H
To the wall socket.
Illustration: MD-MT88H
Insert according to the direction arrow. AC 220-230V, 50/60 Hz (For Europe)
2
To the DC IN 5V socket. Insert securely, all the way in.
1 Slide the OPEN lever to release the compartment door.
3 Insert a MiniDisc as shown. 4 Close the compartment door.
When you record on a MiniDisc, check that the erase prevention tab is set to the �Recordable� position.
2 Lift it up.
1 Plug the AC adaptor into the 2 Insert the plug on the other
wall socket.
end into the DC IN 5V socket.
Recordable
Recording prevented
3 Connections
Preparation for use
The unit does not work if the unit is in the hold mode.
Press the HOLD button for 2 seconds or more. Hold
Illustration: MD-MT88H
Release
OPTICAL/ LINE IN
White: To Left Red: To Right
LINE OUT
To a stereo system with �LINE OUT� or �AUDIO OUT� sockets.
Note: If the audio system has only one pair of sockets they are usually for input only and recording via this connection is not possible.
Illustration: MD-MT88H
RIGHT
LEFT
CAUTION: It is not recommendable to put the MiniDisc into a rear pocket, as this may damage the product when sitting.
