jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Bardzo dobra instrukcja. Zawiera wszystko co potrzeba, polecam!
Tekstowy podgląd strony 7 (kliknij aby zobaczyć)
ERROR MESSAGES
Error messages Meaning Remedy
replace alkaline battery (or use the (Lo BATT)
The run down. q Charge the rechargeable battery or BATT EMPTY
AC adaptor for power).
BLANK DISC Nothing is recorded. q Replace the disc with a recorded disc. (BLANK) Can�t COPY No copy can be made because of q Record using the analog cable.
and then try editing it.
SCMS copyright system. (Not REC)
Can�t EDIT A cannot be edited. q Change stop position of the track
Recording cannot be performed q Re-record or replace it with another Can�t REC
(Not REC) the unit.
correctly due to vibration or shock in recordable disc.
Can�t WRITE Editing is impossible. q Check the number of tracks.
q Replace the disc with another (DEFECT) recordable disc.
DEFECT recording again.
The disc scratched. q If the sound you hear is not right, try
Din UNLOCK Poor connection of cable. q Connect the digital cable securely. (UNLOCK)
DISC FULL
The disc is out of recording space. q Replace it with another recordable disc.
The unit is in hold mode. q Return the HOLD switch to its original (HOLD) position. LOCKED The EJECT lever was moved during q Turn off power and remove the
recording or editing. MiniDisc. LOCK ERROR
NO DISC A disc has not been loaded. q Load a disc.
�7�
PB DISC disc.
You tried to record on playbackonly q Replace it with a recordable disc.
POWER ? sources.
Improper is being supplied. q Use one of the specified power
The MD is protected. q Move the write protection knob back to q You tried to record without loading an its original position.
A playback-only MD was loaded and q Replace it with a recordable MD.
q Load a recordable MD. PROTECTED
REC button was pressed when the power was off.
READ ERROR The is damaged. q Reload the disc or replace it. (E-READ) q Replace it with another recorded disc.
Since track number is currently being q Wait for a while and try the operation SORRY
(SORRY) accept your command.
located or written to, the unit cannot again.
SYSTEM ERR You come conclusion that q To have it repaired, go to the distributor (E-SYS) unit is out of order. where you purchased the unit. TEMP OVER The temperature is too high. q Turn off the power, and wait for a while. (E-TEMP) TOC ERROR A large portion of the disc has been q Replace it with another recorded disc. (E-TOC) damaged.
There is no space left for recording q Replace it with another recordable disc.
TOC FULL character information (track names,
disc names, etc.).
being erased. it was recorded.
The has been protected from q Edit track with the device on which Tr. Protect
U TOC ERROR A large portion of the disc has been q Replace it with another recorded disc.
(E-UTOC) q There is an error in the recorded signal. try recording again.
damaged. q Erase all of the signal errors, and then
? DISC music was cannot be played.
other than q A disc which contains non-music data
There is an error in signal from the q Replace it with another recorded disc. (?DISC)
