SONY MDSE10
Instrukcja Obsługi

Naming a Track or MD Using the Keyboard
You can easily enter or edit names.

Using the Edit Menu

1

Do the following to name a track or MD. � To name a track or MD Press [Esc] while the recorder is stopped, playing or paused. � To name a track during recording. Press [Esc} during recording. �Edit Menu� appears in the display.

Short cut to the naming procedure

1

To give a name to a track or MD, do the following. � To name a track Press Num Lock while the desired track number is displayed and the recorder is stopped, playing, paused or recording. � To name a MD Press Num Lock when no track number is displayed and the recorder is stopped. A flashing cursor appears in the display, and the characters can be entered.

2

Press [�]/[�] or [Tab]/[Shift]+[Tab] repeatedly until �Name?� appears, then press [Enter]. While the recorder is recording, a flashing cursor appears in the display, and you can enter a name for the track being recorded. In this case, please go to step 5. Press [�]/[�] or [Tab]/[Shift]+[Tab] repeatedly until �Nm In?� appears, then press [Enter]. Press [�]/[�] or [Tab]/[Shift]+[Tab] repeatedly until the track number (when naming a track) appears or �Disc� (when naming the MD) flashes, then press [Enter]. Characters can be entered. Enter the name. Press [Enter] or [Num Lock]. �Complete!� appears for a few seconds, and the naming is completed.

3 4

2

Enter the name For more on editing during entry, refer to the chart below. Press the Enter key or Num Lock key The disc or track name is displayed from its beginning.

3

5 6

Operations you may wish to do while naming a track or MD To Cancel the operation Switch between uppercase and lowercase letters Operating the MD Recorder Using a Keyboard Press [Esc] [Caps Lock] (or hold down [Shift]* while entering letters for uppercase) [�] or [�] [Delete] [Back Space]

Move the cursor Erase the character at the cursor position Erase the character preceding the cursor
*

If you have assigned characters to keys using [Shift] (see page 58), the characters you assigned have priority.

z Undoing the naming of a track or MD 1 Press [F11] �Name Undo?� appears. 2 Press [Enter]. Press [Esc] to cancel the operation.

56