CONTROL PANEL FEATURES (CONT.)
Using the demo/learning feature
You can set your microwave oven to display your commands as you enter them without turning the magnetron on. This feature helps you learn to use your oven without actually cooking food. To set the demo/learning feature: To cancel the demo/learning feature:
TOUCH
TIMER OFF
TOUCH
TIMER OFF
and hold for 5 seconds Two tones will sound and the small �d� will disappear from the display.
and hold for 5 seconds Two tones will sound and a small �d� will appear on the display.
USING THE EXHAUST FAN
The pad on the bottom right of the control panel controls the 2-speed exhaust fan.
1. Choose fan speed.
NOTE: If the temperature from the range or cooktop below the oven gets too hot, the exhaust fan in the vent hood will automatically turn on at the HIGH setting to protect the oven. It may stay on up to an hour to cool the oven. When this occurs, the FAN pad will not turn the fan off.
TOUCH
VENT FAN
HIGH/LOW/OFF
(once for high speed, twice for low speed)
2. Turn off fan when desired.
TOUCH
VENT FAN
HIGH/LOW/OFF
(1 or 2 more times, depending on fan speed)
USING THE COOKTOP/COUNTERTOP LIGHT
The pad on the bottom left of the control panel controls the cooktop/countertop light.