Panel Descriptions line voltage be interrupted due to a power blackout or power cord disconnection.
3. OUTPUT Jack
Connect this jack to the input of a guitar amp or another effects processor.
2. CHECK Indicator
This indicator shows whether the effect is on or off, and also doubles as the battery check indicator. The indicator lights when the effect is on. * If you're powering the unit with a battery and the CHECK indicator goes dim�or doesn't light at all�when you try to turn the effect on, the battery is near depletion and should be replaced. For instructions on changing the battery, refer to �Changing the Battery� (p. 11). * The CHECK indicator shows whether the effect is being applied or not. It does not indicate whether the power to the device is on or not.
4. Pedal Switch
This switch turns the effect on/off.
5. Thumbscrew
When this screw is loosened, the pedal will open, allowing you to change the battery. * For instructions on changing the battery, refer to �Changing the Battery� (p. 11).
6. INPUT Jack
This jack accepts signals coming from a guitar or other musical instrument, or another effects unit. * The INPUT jack doubles as power switch.
