Using the Dynamics Processor
The MMP-2 provides a compressor to help control volume changes. Use the following procedure to turn on the MMP-2's compressor: 1. Press the DYNAMICS EDIT SELECT button��COMPRESSOR� appears on the display. 2. Turn the knob beneath COMPRESSOR so "ON" is displayed. 3. Use the PAGE buttons to navigate through the various dynamics parameters. Turn the knob beneath any parameter to change its value. 4. To hear the input signal without compression, press DYNAMICS BYPASS so it turns solid red. Press it again to turn the compressor back on. 5. Repeatedly press METER until it�s red to display gain reduction, or orange to show output level.