Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 9 (kliknij aby zobaczyć)
Operating
Time-of-Day Clock
Basics .......................... ... ...... ... ...... .....
� After plugging in the oven or after a power outage, the Display will flash "1:00", "T/TABLE ON". Set the clock following the directions above. The "time-of-day" clock is a 12 hour clock. If set, the time of day will always be displayed when no other cooking function is being used. The time of day returns to the current time when the oven turns off.
Basic instructions 1. Touch the CLOCK/AUTO START Pad. The Display will show "CLOCK". 2. Set the time of day by touching the appropriate numbers. 3. Touch the CLOCK/AUTO START Pad. The colon will flash. � � �
Level
* Note: Full power is automatic. If you wish to use a different power level, touch the POWER LEVEL Pad. Enter the power level desired by touching the appropriate number pad. (See Cooking Guide on page 9). Start with the shortest recommended time and add more time as needed. Check the food as it cooks. The oven door can be opened any time during operation. It will automatically stop and maintain the time setting until the door is closed and the START Pad is touched again. � If the START Pad is touched and the oven does not operate, check the area between the door and door seal for obstructions. The oven will not start until the door is completely closed.
Basic Instructions 1. Touch the COOK TIME Pad. 2. Enter the cooking time by using the number pads. For example, for 1 1/2 minutes touch numbers 1, 3, 0.* 3. Touch the START Pad. � � � � The cooking time will appear in the Display Window. The oven will start cooking and time countdown will begin, The oven will stop automatically when the time is done and beep three times. "END" appears in the Display. � � �
