Sound Setup Page (underlined options are the factory default settings)
NIGHT MODE This mode optimizes playback of sound at low volume. High volume outputs will be softened and low volume outputs will be enhanced to an audible level. This feature is only applicable for DVD video discs with Dolby Digital mode. { OFF } � Turns off night mode feature. Selects this to enjoy the surround sound with its full dynamic range. � Turns on night mode.
{ ON } CNTR DELAY
Set the delay time in relation to the listening position/distance from the center speaker. Use keys to set the delay times (5ms, 3ms, 2ms, 1ms or OFF) and press OK to confirm. Set the delay time in relation to the listening position/distance from the rear speakers. Use keys to set the delay times (15ms, 12ms, 9ms, 6ms, 3ms or OFF) and press OK to confirm. Note: 1 ms increase/decrease of delay time is equivalent to 30 cm change in distance. Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers.
REAR DELAY
TEST TONE
This feature helps you to judge the sound level of each speaker. { OFF } { ON} � Turns off test tone. � Turns on test tone, the test signal will be automatically generated when you set the speakers� channels.
