FUNAI MS21HYPER
Instrukcja Serwisowa

http://cxema.ru
PITCH � . to move the picture down all input signals received. ZOOM/SMOOTHING for text-based applications.) LANGUAGE V The CONTRAST OSD appears. OPTION CENTER

Getting Customizing Started Your Monitor

For vertical adjustment, select V using �/� 1 Press the MENU button. STANDARD buttons and adjust position using the +/� The MENU OSD appears. Standard effect (factory preset smoothing OK MENU buttons. effect). EXIT + . to move picture up Once the contrast is adjusted, it will be stored in memory for TEXT MENU PHASE To make the characters appear clear. (This mode is suited

Adjusting the Contrast

CENTER

H 1 Press the > (contrast) � button. COLOR GRAPHICS CONTRAST for CD-ROM software such as photo images or

To make the pictures appear clean. (This mode is suited

26 illustrations.)

2 Press the �/� buttons to select ZOOM/SMOOTHING,
26 and press the MENU button again. 1 Press the MENU button. turn off the test pattern.
MENU PHASE

5 When you have finished, click [END] on the screen to The ZOOM/SMOOTHING OSD appears. OK MENU The MENU OSD appears.
48. 4kHz / 60Hz

EXIT MENU

The OSD automatically disappears after about 30 seconds. PITCH
Horizontal Vertical CENTER Frequency* ZOOM/SMOOTHING

To close OSD, press the MENU button twice. ZOOM/SMOOTHING 2 Press the +/� buttons. LANGUAGE SMOOTHING FULL2 +. . for more contrast REAL Once the brightness is adjusted, it will be stored in memory � . for less contrast The ZOOM/SMOOTHING OSD appears. D
COLOR OPTION

Adjusting the Picture Brightness ZOOM FULL1 GB

2 Press the �/� buttons to select ZOOM/SMOOTHING, F

for all input signals received. and press the MENU button again.

1 Press the ¨ (brightness) � button.
ZOOM/SMOOTHING BRIGHTNESS SMOOTHING FULL2 ZOOM/SMOOTHING REAL 26

BRIGHTNESS appears. The OSD automatically disappears after about seconds. 3 Press the �/� buttons to select ZOOM. MENU

ES I signal appear in the CONTRAST OSD. ZOOM FULL1

* The horizontal and vertical frequencies for the received input

1-5
4 Press +/� buttons to select the desired mode.
To close OSD, press the MENU button twice. current input signal.

ZOOM FULL1

Changing the Picture Size

48. 4kHz / 60Hz REAL

SMOOTHING FULL2

According to the Signal

Horizontal Vertical The monitor is set at factory to display picture on the Frequency*

2 Press the +/� buttons. resolution. You can also view the picture at its actual aspect

screen in full, irrespective of picture�s mode or 3 Press the �/� buttons to select SMOOTHING.

ZOOM/SMOOTHING ratio or resolution. Note that 1280 � 1024 resolution signals SMOOTHING TEXT � . for less brightness The OSD automatically disappears after about 30 seconds.

+ . for more brightness ZOOM STANDARD fill the entire screen and ZOOM is not possible. Once zoom is set, it will be stored in memory for the

GRAPHICS

To display picture on the screen in full FULL 1

The OSD automatically disappears after about 3 seconds. The input signal is displayed on screen in full, 4 Press +/� buttons to select the desired mode.

* The horizontal and vertical frequencies for the received input

signal appear in the BRIGHTNESS OSD.

If the picture displayed at FULL 1 or FULL2

Select �FULL 1� in step 4. irrespective of the picture�s mode or resolution. FULL 2 The input signal is displayed on the screen at its actual aspect ratio. Therefore, black bands may appear at the If screen is too bright when using the monitor in a mode is not smooth

dark room top and bottom of picture depending on the signal. Decrease BACKLIGHT (page 15). Use the picture function. The smoothing effect

REAL The OSD automatically disappears after about 30 seconds. becomes stronger in the order of TEXT STANDARD n resolution. (Sub-SXGA signals are displayed at the center GRAPHICS. Note that 1280 � 1024 resolution signals are of the screen surrounded by black frame.) shown only in REAL mode and SMOOTHING is not possible. Once the smoothing is set, it will be stored in memory for the current input signal.

To close OSD, press the MENU button twice. The input signal is displayed on the screen at its actual

12 13