Newly Added Functions in version 1.20
Following functions have been added to the system for the MV-8000 version 1.20 or later. � Receive and synchronize to MIDI Clock (as a �slave� device) ...................................................................... (p. 1) � Receive and synchronize to MTC (as a �slave� device) ................................................................................. (p. 2) � Importing a portion of an Audio CD ..................................................................................................................... (p. 4) � Easily selecting MIDI Events or Audio Events (Quick Region) ..................................................................... (p. 5) � Initiate recording when a note message is received ....................................................................................... (p. 6) � Directly select a pad bank ....................................................................................................................................... (p. 6) � Use the MIDI IN connector of the DIF-AT24 ........................................................................................................ (p. 6) � Cancel Mixdown Mode ............................................................................................................................................. (p. 6) � Added shortcuts ........................................................................................................................................................ (p. 7) � Copy or move entire folders ................................................................................................................................... (p. 7) � Prevent the hard disk from being formatted (HD Format Protect parameter) .......................................... (p. 7) Also, the screens and parameters have added or changed. � Added and changed screens .................................................................................................................................. (p. 8) � New default settings for the Shuffle Quantize parameters .......................................................................... (p. 10) � �Phrase� added to the Step Time parameter ................................................................................................... (p. 10)
Receive and synchronize to MIDI Clock (as a �slave� device)
MIDI Clock messages from an externally connected sequencer or recorder (�master device�) can be received by the MV-8000, causing the MV-8000 to operate in synchronization as a slave device. The example given below is a setup in which a sequencer is the master device, and the MV-8000 receives MIDI Clock messages at its MIDI IN.
When the MV-8000 is operating as a synchronization slave, the synchronization signals can be received through either the MV-8000�s MIDI IN connector or the MIDI IN connector of the DIFAT24. However, you must set
MIDI OUT
1
Connect your sequencer to the MV-8000.
fig.MV-MIDI-909.e
MIDI Cable MIDI Clock MIDI IN
the Sync Mode (p. 9) to specify the connector through which the synchronization signals are to be received.
When synchronized as a MIDI Clock slave, �Wait Note� of the Count In setting is not available.
Sequencer MV-8000
2 3
Press
.
The SONG SETUP MENU screen will appear.
With the cursor located in the upper row of icons, press select the SYNC icon and press . The SYNC screen will appear.
