TOSHIBA MW20FP3
Instrukcja Serwisowa

DISASSEMBLY INSTRUCTIONS
3-11: FEED MOTOR (Refer to Fig. 3-11-A) 1. Remove the 2 screws 1. 2. Remove the Feed Motor. 3. Remove the Motor Gear.
11

Main Chassis Ass'y Motor Gear Feed Motor � Screw Torque: 1 ± 0.5kgf�cm

Fig. 3-11-A

NOTE 1. In case of the Motor Gear installation, check if the value of the Fig. 3-11-B is correct. 2. When installing the Feed Motor, check if the cable is positioned as Fig. 3-11-C.

Motor Gear

6.1 ± 0.1mm

Feed Motor

Safety surface for pressing of the insert.

Fig. 3-11-B

Main Chassis Ass'y

Feed Motor

Pass the cable between 2 pins.

Fig. 3-11-C

B3-4