The Display will show what you touched. This example shows you touched Number Pad 5 for 50% of full power.
5. Touch a Number Pad for the Cook Power you want.
6. Touch
START.
The AUTO SETand PROBE TEMP Indicator Lights will stay on. The Display will show �CCCL� to show the food is less than 90°F As the food cooks the Display will show the internal temperature of the food for every 5°F increase. For 2 of every 10 seconds, the Display will show the Cook Power you selected, if you are using a Cook Power other than high. When the probe senses the temperature you selected, the oven shuts off. �End� will show on the Display and 4 beeps will sound. (You can stop the beeping by p opening the door or by touching CANCEL.] �End� will remain on the Display and a beep will sound every 30 seconds (to remind you that food is left in the oven) until door is opened or CANCEL is touched. The Display will then show the time of day.
BEEP BEEP BEEP BEE
NOTE: You can set Auto Set TEMP to follow COOK 1 or COOK 1 and 2. See pages 11and
12 for instructions. Auto Set TEMP can be programmed with the temperature probe out, but the oven will pause between the last Cook cycle and TEMP�PROB� will show on the Display to remind you to plug in the probe.
Changing
the pre-programmed
selling
You can change the pre-programmed temperature and Cook Power in Auto Set TEMP to the temperature and power you most often use. To change the Auto Set TEMP setting, follow these steps:
1. Insert at least Y3of the temperature
2. 3. 4. 5. 6. 7.
probe into the food. Place food in the oven and close the door. Touch TEMP twice. Touch the Number Pads for the new desired temperature between 90°F and 200°F If high Cook Power is desired, skip to Step 6. Touch COOK POWER. Touch the Number Pad for the desired Cook Power. Touch START.The oven will cook to the new temperature at the Cook Power you selected. After the cooking is complete, the oven will remember that temperature and Cook Power Tor future use. NOTE: If the electric power goes off, the oven will go
