WHIRLPOOL MW8750XL0
Instrukcja Obsługi

SETTING THE CLOCK
When the oven IS first plugged in, the Display shows 8838. If the electric power ever goes off, the Display will also show all 8�s when the power comes back on. You can cook or use the Minute Timer without setting the clock, but the display will be blank after cooking The oven door must be closed before setting the clock.

DO THIS...

THIS HAPPENS...
The Signal Light on the CLOCK SET pad will come on Start touching number pads for the desired time within 5 seconds. The Display will show a �0.�

2.

Touch Number Pads for the correct time of day.

q
USING THE MINUTE TIMER
DO THIS...

.

The Display will flash on and off if you have touched in an incorrect time such as 12:65. The Clock is set when the CLOCK SET Signal Light goes off

The Minute Timer does not start or stop cooking; it works like a kitchen timer. Set in minutes or seconds and you will hear a beep when the set time IS up. The oven door must be closed before setting the Minute Timer.

THIS HAPPENS...
The MINUTE TIMER Signal Light wtll come on and the Display will show a �0.� Within 5 seconds start touching number pads for the desired time

1.

Touch MINUTE TIMER.

2.

Touch Number Pads for minutes and seconds.
The MINUTE TIMER Signal Light will stay on to show that the Minute Timer is running. The Display counts down the seconds to show how much time is left on the Mrnute Timer. When the set time is up, you will hear a long beep and the Display will show the time of day. The door must be closed for the beep to sound.

down
CONTINUED NEXT PAGE

count
P

5