JVC MXJ850R
Instrukcja Obsługi

MX-J100 Removing the CD Tray fitting (See Fig. 4 to 6)
Prior to performing the following procedure, remove the top cover and the side covers.
POWER button

CD tray

OPEN/CLOSE button

ATTENTION: Be sure to remove the CD tray fitting before removing the CD changer unit. 1. Press the POWER button. Press the OPEN/CLOSE button to eject the CD tray. 2. Move the CD tray fitting upward and release the joint b. 3. Press the OPEN/CLOSE button to insert the tray.
Joint b CD tray fitting

Fig.4

Removing the CD Tray fitting (See Fig. 5 to 7)
- How to eject the CD tray without turning on power 1. Turn the black loading pulley gear marked c from the back of the CD changer unit as shown in Fig.7 and draw the CD tray toward the front. 2. Move the CD tray fitting upward and release the joint b. 3. Push and insert the CD tray manually.
Joint b

Fig.5

CD tray

Marked c Loading pulley gear

This slot of the board.

Fig.7

Fig.6

1-6