Bardzo dobra jakość skanu, przystępna cena. Instrukcja serwisowa okazała się przydatna przy "reanimowaniu" dwudziestoparoletniego decka, który teraz pięknie gra :)
Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 15 (kliknij aby zobaczyć)
MX-J970V/MX-J980V Removing the rear cover / rear panel (See Fig.26 to 29)
Prior to performing the following procedure, remove the tuner board, input / output board and the fan motor assembly. There is no need to remove the front panel assembly. 1. Remove the two screws W attaching the rear cover on the back of the body. 2. Remove the five screws E & F, G attaching AUX, main speakers and sub woofers terminals to the rear panel on the back of the body.
Rear cover
Rear panel
W
3. Remove the five screws X attaching the heat sink and the preamplifier board to the rear panel on the back of the body. 4. Remove the two screws Z attaching the voltage selector terminal to the rear panel on the back of the body. 5. Remove the screw Y attaching the rear panel to the base chassis on the back of the body. 6. Release the two joints k and l on the rear panel bottom using a screwdriver, and detach the rear panel backward.
Fig.26
Heat sink
E X F G X Y
Fig.27
X Z
X
Rear panel Rear panel Base chassis Joint l Base chassis Joint k