Listening to the Radio
To select the AM tuner interval spacing
INFO
Main Unit ONLY
To preset Stations
You can preset 30 FM and 15 AM stations.
Some countries space AM stations 9 kHz apart, and other countries use 10 kHz spacing. You can change the AM tuner intervals during the unit is turned on. While AM is selected...
1 Tune in to a station you want to preset, then enter into
the presetting mode.
SET
/DISPLAY
ST
AM 9 k AM 10 k
(holding then...)
2 Select a preset number for the station you store.
PRESET
To select the band (FM/AM)
ST
FM
AM
3 Store the station.
SET
/DISPLAY
ST
To tune in to a station
While FM or AM is selected...
1 sec.
Increases the frequencies. Decreases the frequencies. When a station (frequency) with sufficient signal strength is tuned in, the frequency search stops.
To turn in to a Preset Station 1 Select the band (FM or AM).
FM AM
� When you repeatedly press the button, the frequency changes step by step.
Remote ONLY
If the received FM station is hard to listen
The MONO indicator lights on the display. Reception will improve though stereo effect is lost�monaural reception mode.
(holding then...)
Examples: To select preset number 5, press 5. To select preset number 15, press +10, then 5. To select preset number 30, press +10, +10, then 10. � You can also use 4/¢ buttons on the remote control or the PRESET +/� buttons on the main unit.
To restore the stereo effect, press the button again (the MONO indicator goes off).
15
English
To stop searching manually, press either button.
2 Select a preset number for the station you store.
