JVC MXK5R
Instrukcja Serwisowa

MX-K5R
Removing the tuner board (See Fig.15 and 16)
Prior to performing the following procedure, remove the metal cover and CD changer unit. 1. Disconnect the card wire from connector CON01 on the tuner board. 2. Remove the two screws L attaching the tuner board.
Main board CON01

Removing the eco board (See Fig. 15 and17)
Prior to performing the following procedure, remove the metal cover and CD changer unit. 1.Disconnect the harness from connector PJ2, PJ3 and RCW5 on the eco board. 2.Remove the two screws M attaching the eco board.
PJ3

Tuner board

Fig.16
RCW5

PJ2

Eco board

Fig.17

Removing the rear cover

(See Fig.18)

Prior to performing the following procedure, remove the metal cover, CD changer unit, heat sink & AMP board and tuner board. 1. Remove the five screws N attaching the rear panel.

N
Fig.18

1-10