JVC MX-KB15
Instrukcja Serwisowa

3.1.13 Removing the rear cover / rear panel (See Fig.36 to 38) � Prior to performing the following procedure, remove the top cover / side cover (R) and (L), the CD fitting / CD changer mechanism unit. (1) From the back of the body, remove the four screws H� attaching the rear cover. (2) From the back of the body, remove the two screws J� attaching the rear panel. (3) Release the two joints h on the bottom of the right and left sides of the rear panel, and remove the rear panel. The rear panel comes off with the power board and the heat sink.

Rear panel

J'
Fig.36

Rear panel

h
Fig.37

Raer panel

h
Fig.38 (No.MB287)1-21