JVC MX-SK1AU
Instrukcja Obsługi

English

Using Sleep Timer
With Sleep Timer, you can fall asleep to music. You can set Sleep Timer only while the unit is turned on.
� If you set the Sleep Timer after the Daily Timer starts playing the selected source The Daily Timer is cancelled. When the Sleep Timer shut-off time comes, the unit will turned off. � If you set the Sleep Timer after the recording Timer starts recording The Recording Timer is cancelled, but recording continues until the Sleep Timer shuts off the power. � If the unit is turned on when on-time comes Timer does not work. � When you unplug the power cord or if a power failure occurs The timer will be cancelled. You need to set the clock first, then the timer again.

How Sleep Timer actually works
The unit automatically turns off after the specified time length passes.

On the remote control ONLY:

1 Press SLEEP.
The time length until the shut-off time appears and the SLEEP indicator lights up on the display. � Each time you press the button, the time length changes as follows:
SLEEP10 SLEEP20 SLEEP30

SLEEP

SLEEP60

Cancelled

SLEEP120

SLEEP90

2 Wait for about 5 seconds after specifying the
time length.
To check the remaining time until the shut-off time, press SLEEP once so that the remaining time until the shut-off time appears for about 5 seconds. To change the shut-off time, press SLEEP repeatedly until the desired time length appears on the display. To cancel the setting, press SLEEP repeatedly so that the SLEEP indicator goes off. � Sleep Timer is also cancelled when you turn off the unit.

� 30 �