PHILIPS MZ7C37
Instrukcja Obsługi

CLOCK
English
3 CDC
v
CD CHANGER

TIMER
Setting the Timer
� The system can switch on to CD,
NEWS DIM T.A. SLEEP TRACK PRESET REPEAT AM LW MW FM STEREO PROGRAM TIMER SHUFFLE FRONT BACK REC HSD INCREDIBLE SURROUND LOUDNESS FLAT SOUND
60Hz 250Hz 500Hz 1KHz 2KHz 4KHz 8KHz

TUNER, or TAPE 2 mode automatically at a preset time. It can serve as an
VOLUME

DIGITAL STEREO HIFI SYSTEM
PRESET
v

CLOCK/ TIMER

A�B

DIGITAL CONTROL
TUNER SEARCH/TUNE PLAY / DIM PROG/A.REV REC/CD SYN DUBBING NORMAL�FAST

alarm to wake you up. � Before setting the timer, make sure the clock is set correctly. � The timer will always be switched on once it is set. � The volume of the timer will start to increase from the minimum level until the volume level before the set is switched to standby mode.

5 Press CLOCK/TIMER to store the start time. � The timer is now set. � The TIMER flag remains on the display. � To exit without storing the setting, press STOP. � At the preset time, the timer will be activated. � The selected source will be played.

PRESET

STOP

FLAT

TAPE

BASS
INCREDIBLE SURROUND

TREBLE

DOLBY B NR

LOUDNESS

CDR/AUX

Notes: � During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. � If the source selected is TUNER, the last tuned frequency will be switched on. � If the source selected is CD, playback will begin with the first track of the last selected disc. If the CD trays are empty, the TUNER will be selected instead. � If the source selected is TAPE, and if the preset time is reached during high speed dubbing, the TUNER will be selected instead. � If the recording is active, the timer will be cancelled.

Viewing the Clock
You can view the clock (if it is set) while the system is in standby mode or any source mode. It will be displayed for about seven seconds. � Press CLOCK/TIMER briefly (on the system only). � �PM 10:38� (the current time) will be displayed. � �--:--� will be displayed if the clock is not set.

1 Press CLOCK/TIMER to select clock mode. � �PM 12:00� or the current time starts flashing. 2 Press S or T to set the hour

(PRESET mode OFF). 3 Press S or T to set the
minute (PRESET mode ON). 4 Press CLOCK/TIMER again to store the setting. � The clock starts. � To exit without storing the setting, press STOP on the system.

1 Press and hold CLOCK/TIMER for more than 2 seconds to select timer mode. � �AM 12:00� or the last set timer starts flashing. The TIMER flag flashes. � The last selected source is lit while other available sources are flashing. 2 Press 3 CDC, TUNER or TAPE to select the desired source. � Before selecting CD or TAPE, make sure a CD or tape is loaded in the CD tray or tape deck 2. 3 Press S or T to set the hour for the timer to start (PRESET mode OFF). 4 Press S or T to set the minute for the timer to start (PRESET mode ON).

Setting the Clock
The clock is set in 12-hour mode, e.g. �AM 12:00� or �PM12:00�. Before setting the clock, you must be in the View Clock mode.
24

Notes: � During clock setting, if no button is pressed within 90 seconds, the system will exit clock setting mode automatically. � When a power interruption occurs, the clock setting is erased.