Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 24 (kliknij aby zobaczyć)
MZ-R900
8. Press the x key. (00 is blinking) 9. Adjust with the [VOL+] key (adjusted value up) or [VOL--] key (adjusted value down) so that the adjusted value becomes AA.
Remote commander LCD display
23. Press the [VOL+] key once to change the blinking portion to 0D65.
Remote commander LCD display
023 0D6500
00:Adjusted value
023 0D5DAA
AA:Adjusted value
10. Press the X key. (0D5D is blinking) 11. Press the [VOL+] key once to change the blinking portion to 0D5E.
Remote commander LCD display
24. Press the x key. (00 is blinking) 25. Adjust with the [VOL+] key (adjusted value up) or [VOL--] key (adjusted value down) so that the adjusted value becomes 1C.
Remote commander LCD display
023 0D651C
1C:Adjusted value
023 0D5E00
00:Adjusted value
12. Press the x key. (00 is blinking) 13. Adjust with the [VOL+] key (adjusted value up) or [VOL--] key (adjusted value down) so that the adjusted value becomes 04.
Remote commander LCD display
26. Press the X key. (0D65 is blinking) 27. Press the [VOL+] key once to change the blinking portion to 0D66.
Remote commander LCD display
023 0D6600
00:Adjusted value
023 0D5E04
04:Adjusted value
28. Press the x key. (00 is blinking) 29. Adjust with the [VOL+] key (adjusted value up) or [VOL--] key (adjusted value down) so that the adjusted value becomes 03.
Remote commander LCD display
14. Press the X key. (0D5E is blinking) 15. Press the [VOL+] key to change the blinking portion to 0D61.
Remote commander LCD display
023 0D6100
00:Adjusted value
03:Adjusted value
023 0D6603
16. Press the x key. (00 is blinking) 17. Adjust with the [VOL+] key (adjusted value up) or [VOL--] key (adjusted value down) so that the adjusted value becomes 20.
Remote commander LCD display
30. Press the X key. (0D66 is blinking) 31. Press the [VOL+] key to change the blinking portion to 0D68.
Remote commander LCD display
023 0D6800
00:Adjusted value
023 0D6120
20:Adjusted value
18. Press the X key. (0D61 is blinking) 19. Press the [VOL+] key to change the blinking portion to 0D64.
Remote commander LCD display
32. Press the x key. (00 is blinking) [VOL+] key (adjusted value up) or [VOL--] 33. Adjust with the key (adjusted value down) so that the adjusted value becomes 80.
Remote commander LCD display
023 0D6400
00:Adjusted value
80:Adjusted value
023 0D6880
20. Press the x key. (00 is blinking) 21. Adjust with the [VOL+] key (adjusted value up) or [VOL--] key (adjusted value down) so that the adjusted value becomes F4.
Remote commander LCD display
34. Press the X key. (0D68 is blinking) 35. Press the [VOL+] key once to change the blinking portion to 0D69.
Remote commander LCD display
