WHIRLPOOL N3472SRW
Instrukcja Obsługi

Self-Clean Oven (continued)
BEFORE SELF-CLEANING The self-cleanovenusestemperatures above normalcookingtemperaturesto automatically clean the entire oven. DURING SELF-CLEANING It is normalfor the cooktopof the range to become hot during a clean cycle, Therefore, touching the cooktop during a self-clean cycle should be avoided, The oven automatically begins to heat up when the door is locked. As the oven reaches cleaning temperatures an internal lock engages and the oven door can not be opened. Do not force latch to the left once the internal lock engages. The first few times the oven is cleaned, some smoke and odor may be detected. This is normal and will reduce or disappear with use. If the oven is heavily soiled, or if the broiler pan is left in the oven, smoke and odor may occur, As the oven heats and cools, you may hear sounds of metal parts expanding and contracting. This is normal and will not damage your appliance. Do not attempt to unlock door until internal lock disengages. Door and latch will be damaged if the latch is forced to the left before internal lock disengages. Some soil may leave a light gray, pewdery ash which can be removed with a damp cloth. If soil remains, it indicates that the clean cycle was not long enough. The soil will be removed during the next clean cycre. If the oven racks do not slide smoothly after a clean cycle, wipe racks and embossed rack supports with a small amount of vegetable oil to restore ease of movement. Fine, hair-like lines may appear in the oven interior or oven door. This is a normal condition resulting from heating and cooling of the porcelain finish. These lines do not affect the performance of the oven. AFTER SELF-CLEANING About one hourafter the clean cycle is completed,the internallockwill disengage and the door latch can be returned to its original (unrocked) position. Turn selector knob to OFF.

Turn off oven light before clean cycle, The life of the bulb may be shortened if left on during the clean cycle, Clean oven frame, door frame and around the oven vent with a non-abrasive cleaning agent such as Bon Ami. These areas are not exposed to cleanleg temperatures and should becleaned to prevent soilfrom baking on during the clean cycle. Wipe up excess grease or spillovers from the oven bottom to prevent excessive cycle. cleansmoking or flare-ups during the Do not use oven cleaners or oven liner protective coatings of any kind on the self-clean oven finish oraround any part of the oven. To prevent damage, do not clean or rub the gasket around the oven door. The gasket is designedto seal in heat during the clean cycle,

22