AIWA NSXA92
Instrukcja Obsługi

DUBBING A TAPE MANUALLY

DUBBING THE WHOLE TAPE

m
q q

This function allows you to make exact copies of both sides of the original tape. The reverse side of both tapes will start simultaneously as soon as the longer tape has been reversed.

Set the tape to the point where recording will start. The reverse mode is automatically set to 1. Note that recording will be done on one side of the tape only.

w
1 Press the TAPE button. 2 Insert the original tape into deck 1 and the tape
to be recorded on into deck 2. Insert the tapes with the sides to be played back or recorded on facing out from the unit.
q q q

Dubbing does not start from a point halfway in the tape. The reverse mode is automatically set to =). The Dolby NR does not affect recording.

1 Press the TAPE button.

3 Press the DOLBY NR button to turn off the Dolby NR. ilEl NR on the display goes out. 4 Press the TAPE/DECK deck 1.
�TP 1� is displayed.

2 Insert the original tape into deck 1 and the tape to be recorded on into deck 2.
Insert each tape with the side to be played back or recorded on first facing out from the unit.

1/2 button

to select

3 Press the SYNC DUB button once or twice to start recording. @ For recording at normal speed, press it once to display

5 Press the recording.

q REC/REC

MUTE button to start

Playing and recording start simultaneously. To stop dubbing Press the s button. To set the Dolby NR when playing back the dubbed tape Press the DOLBY NR button and turn Dolby ;NR on or off to match the original tape.

NORM-DUB, ~ For recording at high speed, press it twice to display HIGH-DUB, -

The tapes are rewound to the beginning of the front sides, and recording starts. To stop dubbing Press the s button, To set the Dolby NR when playing back the dubbed tape Press the DOLBY NR button and turn Dolby NR on or off to match the original tape.

Recording does not start, if the erasure prevention tab on either side of the tape is broken off.

m

.

ENGLISH

16