Set the tape to the point where recording will start. The reverse mode is automatically set to Z. Note that recording will be done on one side of the tape only.
This function allows you to make exact copies of both sides of the original tape, The reverse side of both tapes will start simultaneously as soon as the longer tape has been reversed.
m
q q
1 Press TAPE DECK 1/2.
2
Dubbing does not start from a point halfway in the tape. The reverse mode is automatically set to Z). The Dolby NR does not affect recording.
Insert the original tape into deck 1 and the tape to be recorded on into deck 2.
Insert the tapes with the sides to be played back or recorded on facing out from the unit. NR.
q
1 Press TAPE DECK 1/2.
2
3 Press DOLBY NR to turn off the Dolby IXI NR on the display goes out. 4 �(TP 1� is displayed.
Insert the original tape into deck 1 and the tape to be recorded on into deck 2.
on facing out from the unit.
Insert each tape with the side to be played back or recordecl
u
Press TAPE DECK 1/2 to select deck 1.
3 Press SYNC DUB once or twice to start recorcling. (3) For recording at normal speed, press it once to display NORM-DUB. @ For recording at high speed, press it twice to display HIGH-DUB. @ @
5 Press REC/REC MUTE to start recording. Playing and recording start simultaneously.
q
To stop dubbing Press 9. To set the Dolby NFI when playing back the dubbed tape Press DOLBY NR and turn Dolby NR on or off to match the original tape.
The tapes are rewound to the beginning of the front sides, and recording starts. To stop dubbing Press s . To set the Dolby NR when playing back the dubbed tape Press DOLBY NR and turn Dolby NR on or off to match the original tape.
m
Recording does not start, if the erasure prevention tab on either side of the tape is broken off.
