AIWA NSXTR77
Instrukcja Obsługi

TIMER OPERATIONS
4 Press f or g to set the timer-activated duration, then press ENTER or aSET.
With each press, the timer-activated duration changes in 5-minute steps between 5 to 240 minutes.

5 Press f or g to adjust the volume level for timed playback, then press ENTER or aSET.

En

Adjustable range: 0 to 18

6 Prepare the source.
To play CD(s), load disc(s). To play the radio, select the band and tune in to the desired station. To play a tape, insert the tape and select the deck. To play external equipment connected to the VIDEO/AUX jacks, set an external timer for the equipment so that its playback begins at the same time.

Sleep timer
Turns off the unit automatically after a specified time.
1 Press SHIFT+SLEEP on the remote control.
"SLP" appears on the display.

Timer playback
Turns on the unit at a specified time for the specified duration. Make sure the clock is set correctly.
1 Press SHIFT+TIMER on the remote control to display " PLAY".
On the unit, press MODE repeatedly to display "TIMER", and press ENTER within 4 seconds. Then turn MULTI JOG within 6 seconds to select " PLAY", and press ENTER within 4 seconds.

7 Press POWER 6STANDBY/ON to turn the unit off.
At timer-on time, the unit turns on and plays the selected source. After the specified timer-activated duration, the unit turns off again.

2 Press f or g repeatedly to set the sleep timer duration.
With each press, the timer duration changes in 5-minute steps between 5 to 240 minutes. If there is no button input for 6 seconds, the current setting is entered automatically. The unit turns off after the selected time. �MULTI JOG is also available in place of f or g. Tip: The display is dimmed while the sleep timer is active. To check the remaining time until the unit turns off Press SHIFT+SLEEP on the remote control. The remaining time is displayed for 6 seconds. To cancel the sleep timer Press SHIFT+SLEEP twice on the remote control so that "SLP OFF" is displayed.

2 Press f or g to set the timer-on time, then press ENTER or aSET.
If f or g is not pressed within 6 seconds, you will exit the timer setting mode and the previous setting, however, is entered.

Tip: The display is dimmed while the timer playback is active. �To stop timer setting in step 2 to 5, press s. Timer standby mode is also canceled. �Timer playback will not begin unless the unit is turned off first. �Connected equipment cannot be turned on or off by the built-in timer of this unit. Use an external timer. �MULTI JOG is also available in place of f or g.
�In step 3, TAPE, TUNER, VIDEO/AUX, CD or FUNCTION is also available to select the source. In step 5, VOLUME +,- or VOLUME is also available to adjust the volume level.

3 Press f or g to select the source, then press ENTER or aSET.

18